Publicité
Les langues disponibles
Les langues disponibles
Ductwork Installation
10. Use steel pipe to connect the exhaust on the hood
to the ductwork. Use duct tape to make all joints
secure and air tight.
Install Accessories
11. Install the Oil
Tunnel {G} into recess support
near rear of hood. Refer to Figure 7.
12. Install Baffle Filters {H} and Stainless Steel
Spacers {I}.
hood.
Push the baffle filter up until almost level.
Slide forward into recess behind the front of
hood.
Lower baffle filter.
fits into resting position. Refer to Figure 8.
13. For Stainless Steel Spacer, follow above steps.
Final Installation
14. Turn power ON in control panel. Check all lights
and fan operation.
15. Make
sure
to
homeowner.
Angle baffle filter toward back of
Slide back until it
leave
this
manual
Figure 7
Figure 8
for
the
9
Publicité
