Télécharger Imprimer la page

Meec tools 018762 Mode D'emploi page 32

Cloueuse

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
EN
equipment is available, this should be
connected and used correctly. The use of
such devices can reduce the risk of
dust-related problems.
USE AND CARE
Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and safer
when used at the rate for which it was
designed.
Do not use the tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
Pull out the plug or remove the battery
before making any adjustments, changing
accessories or putting the power tool
away. These safety precautions reduce the
risk of accidently starting the tool.
Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
Keep the power tool properly maintained.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If the power tool is
damaged, it must be repaired before
being used again. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
Use power tools, accessories, and bits etc.
in accordance with these instructions, with
due consideration to the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
32
are intended to be used for.
ADDITIONAL INSTRUCTIONS FOR
CORDLESS POWER TOOLS
Only use a battery charger recommended
by the manufacturer. Using a battery
charger intended for a different type of
battery can result in a fire risk.
Only use power tools with the specified
batteries. The use of other batteries can
result in the risk of personal injury and
fire.
When the battery is not in use keep it
away from other metal objects such as
paperclips, coins, keys, nails, screws and
other small metal objects that can short
circuit the terminals. Short circuiting the
battery terminals can cause burns or a
fire.
Batteries can leak if they are not handled
or used properly. Do not touch fluid
leaking from a battery. If you get battery
fluid on your skin, rinse immediately in
plenty of fresh water. If you get battery
fluid in your eyes, rinse immediately with
plenty of water and seek medical
attention. Leaking battery fluid can cause
skin irritation or burn injuries.
SERVICE
The power tool must only be serviced by
qualified service personnel using identical
spare parts. This will ensure that the
power tool remains safe to use.
SPECIAL INSTRUCTIONS FOR NAIL
GUNS
Always assume that a nail gun is loaded
with fasteners – "there are no unloaded
nail guns". Careless handling of the tool
can cause it to be fired unintentionally
and cause personal injury and/or material
damage.

Publicité

loading