Cleaning And Fi Lter Maintenance; Putting Out Of Service And Recycling - S&P COR-PRO V W Mode D'emploi

• Check the tightness of the water coil together with the connection joints. If there is a fi lter in the water system before
the air curtain, clean it and then check the operation of the coil.
• Check the safety of the unit regarding risks of electric shock in accordance with local applicable regulations together
EN
with grounding verifi cation.
12.2. CLEANING AND FILTER MAINTENANCE
COR-PRO V W models incorporate air fi lters in the inlet side. This should be cleaned regularly to ensure the
effi ciency and performance of the air curtain. Cleanliness depends on the local conditions where the curtain is
installed; it is recommended to check the fi lter and clean it once a month. A clogged fi lter does not represent
a safety risk, but curtain performance may change and motor may suffer.
Filter removal:
• Remove the inlet grille.
• Release the fi lter by rotating the securing locks located on the sides of the fi lter.
• Remove the fi lter and clean dust particles. Replace the fi lter (accessory under description AFR COR-PRO-V W) if the
blockage is evident even after cleaning of if fi lter material shows damage.
Only use original fi lters. Other air fi lters may have a quite different fi ltration class or pressure drop. This could
provoke performance reduction or motor overheating causing failure hazard.

13. PUTTING OUT OF SERVICE AND RECYCLING

EEC legislation and our consideration of future generations mean that we should always recycle materials
where possible; please do not forget to deposit all packaging in the appropriate recycling bins. If your device
is also labeled with this symbol, please take it to the nearest Waste Management Plant at the end of its servi-
ceable life.
30