Basic Operation; Basic Settings - S&P COR-PRO V W Mode D'emploi

11.2. BASIC OPERATION

Main screen shows basic operating modes.
EN
FAN
Manual selection of desired speed. After 1 second, value is stored automatically in memory.
TEMPERATURE SET POINT
Desired temperature selection depending on sensor selected (ambient/room sensor or outlet air tempera-
ture sensor).
HEATING
Manual selection of desired heating level. Electric heater will be active only if necessary based on tempe-
rature readings.

BASIC SETTINGS

Access to other adjustment parameters.
• Weekly programming
• Temperature parameters settings
• Reset factory settings
• Door contact adjustment
• Help button (disabled)
• Advanced settings (contact S&P)
11.3. BASIC SETTINGS
WEEKLY PROGRAMMING
Control allows air curtain operation depending on selected hour period. First, activate this function to pro-
gram below.
26
Programming menu:
Weekday and real hour setting menu:
Day of the week
Hour
Minutes
Day of the week
Starts program
Ends program
Program number
Hour
Minutes