Key Automation STAR 300 Manuel D'emploi page 10

IMPORTANT REMARKS
TECHNICAL DATA
OVERALL DIMENSIONS
INSTALLATION LAYOUT
PREPARATORY STEPS
INSTALLATION
INSTALLATION MEASURES
EMERGENCY RELEASE
OPERATION END STOP
ELECTRICAL CONNECTIONS
MAINTENANCE
DISPOSAL
IMPORTANT REMARKS
For any installation problems please contact
Key Automation S.p.A. TEL. (+39) 0421 307456
has the right to modify the product without previous notice; it also declines any responsibility to damage or injury to
people or things caused by improper use or wrong installation.
Please read this instruction manual very carefully before installing and programming your control unit.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE WITH THE EUROPEAN REGULATIONS IN FORCE:
EN 60204-1 (Machinery safety. electrical equipment of machines, part 1: general rules)
EN 12445 (Safe use of automated locking devices, test methods)
EN 12453 (Safe use of automated locking devices, requirements)
equipment from the power supply.
The standards require a separation of the contacts of at least 3 mm in each pole (EN 60335-1).
level.
local rule in force.
ried out workmanlike.
the max. limits, which EN 12453 allows.
the control unit STOP input) so that the gate may be immediately stopped
in case of danger.
ties, or lack of experience and knowledge, unless they have been given supervision or instruction.
INDEX
10
10
11
11
12
12
12
13
14
15
15
16
16
-
-