General Operation - Oregon PS250 Manuel D'instructions Original

Scie à long manche
Masquer les pouces Voir aussi pour PS250:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OREGON® Cordless Tool System
POLE SAW MODEL PS250

GENERAL OPERATION

DANGER: TO AVOID SERIOUS
PERSONAL INJURY, DO NOT
OVERREACh AND DO NOT STAND
ON A LADDER, STEPSTOOL, OR
ANY RAISED POSITION ThAT IS NOT
FULLY SECURED.
DANGER: TO AVOID SERIOUS
PERSONAL INJURY, DO NOT STAND
DIRECTLY UNDER ThE LIMB BEING
WORKED ON. STAND AWAY SO ThAT
ThE LIMB FALLS SAFELY TO ThE
GROUND.
WARNING: TO REDUCE ThE RISK
OF INJURY, ALWAYS WEAR PROPER
BOOTS, GLOVES, hEAD, EAR, AND
EYE PROTECTION.
OPERATING TEMPERATURE
This pole saw is designed to operate
within a temperature range of 32°F to
104°F (0°C to 40°C)
GRIP
Always grip the tool with both hands For
right-handed operation, grasp the
extendable shaft comfortably with the
left hand and the rear handle with the
right Wrap fingers firmly around each
handle (Fig 21)
FIG. 21
rIGHT-HANDED GrIP
AD 0414 - F/N 563397
OPErATING THE POLE SAW
For left-handed operation, grasp the
extendable shaft comfortably with the
right hand and the rear handle with the
left (Fig 22)
FIG. 22
LEFT-HANDED GrIP
Hold the pole saw at about a 60° angle
(Fig 23); this is the least tiring work
position and helps ensure a safe distance
from falling debris
FIG. 23
60°
19

Publicité

Table des Matières
loading

Table des Matières