Bostitch HP118K Manuel D'instructions Et D'entretien page 9

ADJUSTING THE BELT HOOK FOR A LEFT-HANDED USER
In order to adjust the tool for a left-handed user, simply remove the belt hook assembly, rotate it 180° and
re-assemble. The following depicts exactly how this is done:
1. Remove both spring pins that attach the belt hook assembly to the frame as shown in Fig 1.
2. Slide the belt hook assembly away from the rear of the tool as shown in Fig 2.
3. Rotate the belt hook assembly 180° as shown in Fig 3.
4. Align the holes in the frame with the holes in the mount. Then, re-assemble both spring pins
as shown in Fig 4.
Fig.1
Fig.3
USING THE BELT HOOK
Fig.2
Fig.4
-9-