Switching off the alarm
When the alarm sounds, you can deactivate it as follows:
Press the POWER ON/OFF button [10] to stop the alarm. The alarm is
switched off until the next day.
or
Press the SNOOZE button [11/15] to postpone the alarm for about 9
minutes. The alarm sounds again after this time.
Sleep timer
You can use the sleep timer to switch on the device and switch it off
automatically after a selected time.
Press the SLEEP button [14] when the device is switched on or off. If
only the backlight was switched on when you pressed the button, you
must press the SLEEP [14] button again. The display then shows
"SLEEP" [27] and the number "90" and thus indicates that the device
will switch off after 90 minutes.
Repeatedly press the SLEEP button [14] to reduce the switch-off time.
Each time you press the button, the time is reduced by a further 10
minutes.
During snooze, "SNOOZE" [26] is indicated on the
display [8] and the symbol
SilverCrest SWED 250 A1
[32] or
[31] flashes.
English - 117