SilverCrest SWED 250 A1 Manuel D'utilisation Et Informations Sur Les Services page 118

SilverCrest SWED 250 A1
 Set the hours with the M– [2] or M+ [3] button. You can also keep the
M– [2] or M+ [3] button pressed to speed up the progress of the
numbers.
 Set the minutes with the < SEARCH [6] or SEARCH > [7] button. You
can also keep the < SEARCH [6] or SEARCH > [7] button pressed to
speed up the progress of the numbers.
 Then wait until the set alarm time stops flashing on the display [8]. The
alarm time is then saved automatically.
 The display [8] then indicates the time and the symbol
for the alarm function with alarm tone or the symbol
alarm function with radio.
 To deactivate the alarm function, press the ALARM button [16]
repeatedly until the symbols
display [8].
116 - English
Note that you can only adjust the alarm time as long as
the alarm time is flashing on the display [8]. If no entry
has been made for a few seconds, the alarm time on the
display [8] stops flashing and the process must be
repeated.
Even if the alarm function is activated, you can use the
device as usual.
[32] and [31] are deleted from the
[32] again
[31] for the