Table des Matières
Publicité
HOW TO CLEAR A BLOCKAGE AND MAINTAIN FLOOR NOZZLE
ENGLISH
CAUTION: Always unplug vacuum cleaner
before cleaning hose or nozzle.
The vacuum cleaner may stop automatically
if the nozzle, wand or filters become
blocked. If this happens, unplug and allow
the vacuum to cool for 20 to 30 minutes.
Clearing the wand and hose
1. Use a rod or similar blunt implement to
clear a blockage in wand or hose.
2. Sometimes an obstruction can be cleared
by squeezing or flexing the hose. Use
extreme care if there is a risk that glass,
nails or other sharp objects could be
imbedded in the hose.
Note: Warranty does not cover any damage
to the hose caused by cleaning it.
3. Clean hard floor and rug nozzle frequently
Cleaning the floor nozzle
to avoid deterioration of suction power.
Use crevice tool to remove dust balls, hair
or objects that may be entangled.
4. Clean turbo nozzle by vacuuming with
crevice tool. Use scissors to snip threads
or hair entangled in the brush roll, then
vacuum away.
Storing and carrying
1. To carry canister, lift with top handle.
Never use dust cup to carry canister.
2. When you pause during cleaning, park
floor nozzle by slipping ridges into slot
on back of canister.
3. Use alternate parking position when
vacuum is stored on end.
4. For storage, press hose into clip on
tool caddy.
14
www.electrolux.com
1
3
2
1
3
2
4
4
Publicité
Table des Matières
