Klarstein CONTEMPO Mode D'emploi page 30

EN
30
Touch control (T02)
Digital display key:
Press this key to make power on and off.
Power down key:
On working condition, press this key to decrease the power one level.
Power up key:
On working condition, press this key to increase the power one level.
Delay key:
On stand-by and working condition, press this key for 3 sec, the digital
display blinks, we can set the delay power off time from 1 minute to
9 minutes; press the key again to save the setting. If no press is made
for10 sec, then the setting would be saved automatically.
When the motor is on and the delay setting is saved, we can still adjust
the setting, and the display window all display the countdown time.
When the motor is not working, can just set the delay time, does not
have countdown function. The delay would turn to countdown time
when the motor is working.
Light key:
Press one time for turning the light on, press another to turn the light off.
Note: On working condition, the digital display would off if 2 minutes without
pressing, press again, the key lights on.