Memorizzazione Dei Canali; Richiamo Dei Canali Memorizzati; Storing Channels; Calling Up The Stored Channels - Paso CMDS Série Instructions D'utilisation

Système de diffusion sonore compact
Masquer les pouces Voir aussi pour CMDS Série:
Table des Matières

Publicité

USO DELL'APPARECCHIO

4.3.1 Memorizzazione dei canali

Il sintonizzatore dispone di 10 posizioni di memoria per la banda FM e di 5
per la banda AM. Per memorizzare una stazione radio precedentemente
sintonizzata, occorre operare come segue:
1. Premere il tasto ME;
2. Premere il tasto MEMORY (M1, M2...) relativo al numero progressivo
che si vuole attribuire al programma.
Una volta memorizzata una stazione radio, comparirà, a lato della
frequenza visualizzata sul display, il numero della posizione di memoria ad
essa associata.
Per memorizzare i canali da 6 a 10, occorrerà invece:
1. Premere il tasto ME;
2. Premere il tasto SHIFT;
3. Premere il tasto MEMORY (M1, M2...) relativo al numero progressivo
che si vuole attribuire (5 + 1...).

4.3.2 Richiamo dei canali memorizzati

Per richiamare una stazione memorizzata nei canali da 1 a 5 è sufficiente
premere il tasto relativo alla posizione desiderata; per richiamare una
stazione memorizzata nei canali da 6 a 10 è necessario invece far
precedere la pressione del tasto MEMORY da quella del tasto SHIFT.
12
POS. 1
POS. 6
4

4.3.1 Storing channels

The tuner has 10 storage cells for the FM band and 5 for the AM band.
To store a previously tuned radio station, you must proceed as follows:
1. Press the ME key;
2. Press the MEMORY key (M1, M2, etc. referred to the progressive
number you wish to assign to the program.
Once a radio station has been stored, the number of the memory cell
associated with it will appear next to the frequency shown on the display.
To store channels 6 to 10, on the other hand, it is necessary to:
1. Press the ME key;
2. Press the SHIFT key;
3 Press the MEMORY key (M1, M2, etc. referred to the progressive
number you wish to assign (5 + 1...).

4.3.2 Calling up the stored channels

To call up one of the stations stored in channels 1 to 5, it is sufficient to
press the key corresponding to the required position.
To call up one of the stations stored in channels 6 to 10, on the other
hand, it is necessary to press the SHIFT key before pressing the
MEMORY key.
SERIE CMDS
USING THE EQUIPMENT
POS. 3
POS. 10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pa312-mp3

Table des Matières