Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Modifying the name associated with the zone (MZC)
In the window for modifying the name of a zone (always identified by its
indicator
A
), you can modify the string identifying the zone (
To return to the previous page, press the
stored automatically if 5 minutes elapse with no interventions.
A
ZONE:
1
B
24
B
key. The homepage will be re-
MZCUI (1)
OUTDOOR UNIT MENU
).
View outdoor unit status
In the outdoor unit menu, you can view or set the data for each single out-
door unit (the system can manage up to four). The information available for
each outdoor unit is as follows:
A
Outdoor unit status:
: (green) enabled for operation
•
: (grey) OFF
•
: (red) in alarm mode
•
B
Outdoor unit indicator (between 1 and 4)
C
Active season:
: summer (cooling)
•
: winter (heating)
•
D
In this position, you will see the icons relating to the operation of the
selected outdoor unit:
•
outdoor unit off
•
outdoor unit in standby
•
outdoor unit with only the circulator active
•
outdoor unit with the compressor and circulator both active
•
outdoor unit in reserve status
•
outdoor unit in defrosting phase
•
outdoor unit in alarm mode
E
Indicates that the outdoor unit is producing domestic hot water
F
Indicates that the additional heater is active on the outdoor unit
G
Working power of the selected outdoor unit
H
Processed water temperature
I
Setpoint active on the outdoor unit
L
Temperature of the return water
M
Outside air temperature;
The keys along the bottom of the window have various functions:
Navigate the various outdoor units: to select a different outdoor unit,
press the
(next) and
Access the outdoor unit settings page: to access the page, press
Switch the selected outdoor unit on or off: press the
To return to the previous page, press the
stored automatically if 5 minutes elapse with no interventions.
A
OUTDOOR UNIT
30.8
H
I
43.0°C
L
26.0°C
M
26.0°C
(previous) keys.
key
key. The homepage will be re-
B
C
D
E
1
°C
F
G
Publicité
Table des Matières
