Bosch Quigo Green Notice Originale page 22

22 | English
Loosen the fastening screw (15) of the holder, position the holder in the de-
sired location and retighten the fastening screw.
Place the measuring tool with the tripod mount (8) on the 1/4" screw (13)
of the holder and tighten it to secure it on the holder applying moderate
force. Do not tighten the measuring tool firmly as this could cause damage.
Roughly align the holder before switching on the measuring tool. To do this,
loosen the locking screw (14). Move the measuring tool into a horizontal po-
sition at the required height (with the tripod mount (8) facing down).
Retighten the locking screw.
You can also mount the measuring tool on the holder using the adapter
plate (3).
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable support surface for measuring.
Place the measuring tool with the 1/4" tripod mount (8) on the thread of the
tripod (6) or a conventional camera tripod. Tighten the measuring tool using
the locking screw of the tripod.
Roughly align the tripod before switching on the measuring tool.
You can also mount the measuring tool on the tripod using the adapter
plate (3).
Working with the adapter plate (see figures B–C)
The adapter plate (3) makes it easier to accurately align the measuring tool
with a reference point and enables you to quickly attach and detach the
measuring tool.
The adapter plate (3) can be mounted on the holder (16) or tripod (6).
– Holder: Place the adapter plate with the 1/4" mount (1) on the
screw (13) of the holder and tighten it to secure it on the holder applying
moderate force.
Note: Loosen the locking screw (14) of the holder if you want to change
the position of the measuring tool. If the adapter plate is turned without
loosening the locking screw, the adapter plate can become loose and the
measuring tool can fall off.
– Tripod: Tighten the locking screw of the tripod in the 1/4" mount (1) of
the adapter plate.
Press the measuring tool into the adapter plate (3) so that the locking mech-
anisms of the adapter plate engage in the holes on two sides of the measur-
1 609 92A 64W | (11.12.2020) Bosch Power Tools