Removing The Switch Housing Cover; Removing The Dust Bag Housing - Kärcher Windsor Versamatic VS14 Mode D'emploi

Maintenance
3 Wire
2
2
12
Maintenance and repairs must be done by
qualified personnel.
To reduce risk of electric shock unplug before
cleaning or servicing.

Removing the Switch Housing Cover

Remove the three screws then lift cover off. Circuit
board (33) can be removed by loosening screw (32).

Removing The Dust Bag Housing

2
Remove the back cover, then remove the 4 screws
(2). Carefully lift the dust bag housing off the power
head.
NOTE: The power cord remains attached between
the dust bag housing and the power head.
1
86404570 VERSAMATIC 14 & 18 120V
33
32