Characteristics Of The Sensor; Measurement Conditions - Chauvin Arnoux C.A 1725 Notice D'utilisation

- Duty cycle function
Range %
Resolution
Accuracy
Frequency range
Measurement time
Stability
* Usable only with the external input.
- Event counter function
Measurement range
Counting frequency
range
Accuracy of count
6.3 CHARACTERISTICS OF SENSOR

- Measurement conditions

- Optical sensor
Reflecting area: from 10 to 90% of the area of the target.
Surface of the target: in the absence of the reflecting adhesive, the device must not be able to make a
measurement.
Measurement distance: from 1 to 50cm. The maximum distance is valid for a reflecting adhesive tape
having an area of at least 10cm².
Measurement angle: ± 15° from the perpendicular to the reflecting surface.
- variation in the range of use
Quantity of Limit of the range
influence of application
Ambient -10 to + 70°C
temperature
Humidity 10% to 90% HR
without condensation measured
Power supply 7 to 10V
*9999.9 999.99
- -
1000.0 100.00
0.1%
0.1% of full scale from 0.2Hz to 50Hz 1% of full scale
0.2% of full scale from 50Hz to 125Hz
0.2 to 125Hz 1 to 125Hz
6s>t>0,5s 1,5s>t>0,5s
± 1 point from 0.2Hz to 50Hz
± 2 points from 50Hz to 125Hz
from 0 to 99999 events
from 1Hz to 10kHz
from 0.1Hz to 10kHz with
external input in
expanded range
± 1 event
Quantity
influenced
Any quantity
measured
Any quantity
Any quantity
measured
55 55
99.999
-
10.000
1%
125 to 500Hz
< 0.5s
± 1 point
Typical variation Max. variation
± 30ppm ± 50ppm
< 1.10-5 not significant
not significant