Reliable SENZA 200DS Guide D'utilisation page 9

H
F
G
E
D
C
B
A
Y X
Fig. 2
Fig. 4
HOW TO USE YOUR IRONING SYSTEM
Remove any labels from the soleplate before using the appliance.
Disconnecting the iron from the tank must occur always and only with the power
plug unplugged from the outlet.
The Senza 200DS can be used in two ways: as an ironing system or as a traditional
iron.
The ironing system mode is recommended for large quantities of clothes and long
ironing times, while for lesser quantities or less ironing time it is recommended to
use the traditional ironing mode.
To use it as ironing system make sure that the iron/boiler connecting cable
(P) and the power cord (A) are inserted in the connection on the cord storage
compartment (X) at the base of the appliance (Fig. 3). See "Using the iron as an
ironing system".
For use in traditional iron mode, unplug the power cord (A) and the iron/boiler
connecting cable (P) from the connections on the cord storage compartment (X)
by pressing the release hook (Q). Connect the cables to each other (Fig. 6) until
you hear a slight click. See "Using as a traditional iron".
To return to using the ironing system mode, unplug the power cord (A) and the
iron/boiler connecting cable (P), by pressing the release hook (Q). Insert the two
cables into the connections on the cord storage compartment (X) at the base of
the appliance until you hear a slight click.
J
I
K
L
M
N
O
P
Q
R S T U
V
W
Fig. 3
Fig. 5
Fig. 7
Fig. 10
Fig. 1
Fig. 13
Fig. 16
Fig. 6
Fig. 19
Fig. 8 Fig. 9
Fig. 11 Fig. 12
Fig. 14 Fig. 15
Fig. 17 Fig. 18
Fig. 20 Fig. 21
06