After Ironing - Reliable SENZA 200DS Guide D'utilisation

VERTICAL IRONING
You can use the jet of continuous steam for ironing hanging fabrics. This special
ironing procedure serves to remove creases from curtains, fabrics, etc... Turn the
steam adjustment knob (T) to MAX. Wait for the steam ready light (R) to turn on.
Set the ironing temperature by turning the adjustment knob (L) past the symbol
(•••). Put the curtain or fabric in the position you would like to iron it and press the
steam button.
WARNING: Do not iron fabrics held by other people.

AFTER IRONING

To prevent lime residue from forming, empty the tank following use and after
having turned off the appliance and unplugged it from the outlet.
Turn off the boiler by pressing the switch (S). The appliance is still energized when
plugged in and it is possible to eliminate the pressure remaining in the boiler by
pressing the steam button (K). Turn the appliance off by pressing the switch (U).
Remove the power cable from the outlet. Empty the water tank completely so
as to prevent the water from stagnating, which may form lime deposit. Store the
power cord in the cord storage compartment (Y). Put back the cable connecting
the iron to the tank in the cord storage compartment (X). Let the iron cool down
on its stand, taking care not to touch the power cables and connection with the
hot parts of the appliance.
USING AS A TRADITIONAL IRON (FIG. 4)
REFILLING THE RESERVOIR
WARNING: Make sure the iron is unplugged from the power supply before filling the
iron tank (M) with water.
Open the door (H). Hold the iron vertically and fill the tank with fresh tap water to
the maximum level (Fig. 20). Use the measuring unit (F) provided. Close the cover
(H) again. If your tap water is very hard, use demineralized water.
NEVER fill the tank above the level indicated by "max".
Do not pour vinegar, mmers or other scented substances into the tank: Otherwise,
the warranty may be revoked.
WARNING: Do not try to fill the tank holding the iron in a horizontal position.
To add water while ironing, always turn off the iron and unplug the power cord
before filling the tank with water.
10