Steam Ironing; Vertical Ironing - Reliable SENZA 200DS Guide D'utilisation

SWITCHING ON THE APPLIANCE
Place the iron on the iron support rest (D). Disconnect the cables from the
connections on the cord storage compartment (Fig. 5). Connect the power cord
(A) with the iron/boiler connecting cable (P) until you hear a slight "click" (Fig. 6).
Plug into the power supply. The temperature control lamp (N) turns on. Now select
the required temperature using the thermostat knob (L). When the iron reaches
the selected temperature, the lamp (N) turns off (the temperature lamp turns off
and on while ironing, indicating that the iron is maintaining the right temperature).
Follow the instructions on the care label of the garment to be ironed. Make sure
the dots shown on the iron correspond to those shown on the label.

STEAM IRONING

Steam ironing is only possible at a high temperature.
Ensure that there is enough water in the water tank. Place the iron on the iron
stand grid (D). Plug into the main socket.
Position the temperature adjustment knob (L) on position (•••) or higher. When
the indicator light (N) turns off, this means that the soleplate has reached the
selected temperature, and the iron is ready for use.
SHOT OF STEAM
If there is water in the tank and the temperature is set on (•••) or on a higher level,
all you have to do is press the steam button (K).
SPRAY BUTTON
Make sure there is water in the tank of the iron (M). Press the spray button (I). To
enable this feature you may need to press the spray button repeatedly (Fig. 15).
DRY IRONING
Plug into the power supply. Set the temperature control knob (L) depending on the
type of fabric to be ironed. Wait a few minutes for the soleplate to reach the set
temperature. Do not press the steam button.

VERTICAL IRONING

Vertical ironing This special ironing procedure serves to remove creases from
curtains, fabrics, etc. Set the ironing temperature by turning the adjustment knob
(L) past the symbol (•••). Put the curtain or fabric in the position you want to iron
it vertically and press the steam button. If the temperature lamp is on, do not
press the steam button more than three times in a row.
WARNING: Do not iron fabrics held by other people.
11