Black & Decker M170 Manuel page 5

• When Kneading dough, best results can
be achieved by setting the speed
selector at a low speed first and then
high speed.
Note! During operation do not touch the
bowl.
Warning! Keep hands, long hair and loose
clothing away from the beaters.
• When mixing is completed, turn the
speed selector to the "0" position and
unplug the cord from the power outlet.
Cookery tips
• Refrigerated ingredients, such as butter
and eggs, should be at room
temperature before mixing begins. Set
these ingredients out ahead of time.
• To eliminate the possibility of egg shells
in your recipe, break eggs into separate
container first, then add to the mixture.
• Do not over-beat. Be careful that you
only mix/blend mixtures as
recommended in your recipe. Fold dry
ingredients until they are just combined
using the low speed setting.
• Climatic conditions. Seasonal
temperature changes, temperature of
ingredients and their texture variation all
play a part in the required mixing time
and the results achieved.
• Always start mixing at lower speed.
Gradually increase to the recommended
speed as stated in the recipe.
Cleaning and Maintenance
Warning! Before performing any
maintenance:
• Switch off and disconnect from the
mains supply.
• Wait for the appliance to completely cool
down.
• If necessary scrape excess food particles
from the beaters or dough hooks using a
spatula.
Warning! The mixer must not be immersed
in water or other liquid.
(Original instructions)
• Wipe over the outside surface of the Base
with a damp cloth and polish with a soft
dry cloth.
• Wipe any excess food particles from the
power cord.
• Immerse beaters and dough hooks in
warm soapy water for complete cleaning.
Then rinse under running water and wipe
dry. The beaters and dough hooks may be
placed in a dishwasher.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live
terminal in the new plug.
• Connect the blue lead to the neutral
terminal.
• If the product is class I (earthed), connect
the green/yellow lead to the earth
terminal
Note! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with
good quality plugs.
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Warning! The above section on mains plug
replacement is for authorized service centre
persons.
Technical Data
Input voltage
Power Input
Weight
ENGLISH
M170
V 220-240
AC
W 200
kg 1
5