Microsoft XBOX 360 Kinect Sensor Mode D'emploi page 6

cHooSe A LocAtion For YoUr SenSor
2 ft– 6 ft
(0.6m–1.8m)
For the best play space and sensor
performance, place your sensor between 2
and 6 feet (0.6 and 2 meters) high, the closer
to the low or high limit, the better. Also:
• Place the sensor on a stable surface.
• Make sure the sensor is aligned with the
centre of your TV, and as close as possible
to the front edge of the table or shelf.
• Make sure to place the sensor in a
location where it will not fall or be struck
during gameplay.
• Do not put the sensor on your console.
• Do not place the sensor on or in front of a
speaker or a surface that vibrates or
makes noise.
• Keep the sensor out of direct sunlight.
• Do not use near any heat sources. Use the
sensor within its specified operating
temperature range of 41 °F – 95 °F (5 °C –
35 °C). If the sensor is exposed to an
environment outside its prescribed range,
turn it off and allow the temperature to
stabilise within the specified range before
using the sensor again.
important
Only adjust the sensor location by moving
the base. Do not adjust the sensor viewing
angle by hand, by tilting the sensor on its
base. After setup is complete, let the sensor
4
Sold separately*
* Sensor mounting adapter
required for above TV
mounting (sold separately)
motors adjust the viewing angle, or you risk
damaging your sensor.
Warning
Arrange all cables and cords so that
people and pets are not likely to trip
over or accidentally pull on them as
they move around or walk through the
area. When the sensor and console are
not in use, you may need to disconnect
all cables and cords from the sensor
and console to keep them out of the
reach of children and pets. Do not allow
children to play with cables and cords.
Warning
Avoid Glare
To minimise eyestrain from glare, try
the following:
• Position yourself at a comfortable
distance from your television or
monitor and the Kinect sensor.
• Place your television or monitor and
Kinect sensor away from light sources
that produce glare, or use window
blinds to control light levels.
• Choose soothing natural light that
minimises glare and eyestrain and
increases contrast and clarity.
• Adjust your television or monitor
brightness and contrast.