FALMEC ALBA 760 Livret D'instructions page 19

- Connect the hood's electric system, in compliance with current norms.
- Put the metal filters back in place.
INSTALLING THE EXTRACTION HOOD (fig. O2)
Step 1
- Decide how the fumes are to be expelled (from the top or from the back).
- If the fumes are to be expelled from the top install the fitting provided (PF)
and check that the back outlet is closed with a plug (BO).
- If the fumes are to be expelled from the back remove the plug (BO) and
prepare an outlet hole on the wall. In this case the top fumes outlet is closed
by the cabinet.
Step 2
- Remove the hood's metal filters as described in section H1.
- Mount the hood onto the cabinet with the screws provided (A).
- Connect the hood's electric system, in compliance with current norms.
- Put the metal filters back in place.
17