Brandson Equipment 305385 Mode D'emploi page 39

Note: In case of increasing alarm sound (duration: 2 minutes), the vol-
ume changes four times during the alarm signal.
Switching off the alarm
The alarm signal is heard when the set alarm time is reached. Press any
button except the "
ton for more than 3 seconds to stop the alarm signal.
Snooze function:
When the alarm time has elapsed, touch the snooze/sleep button "
" and release it. The alarm signal stops and you enter snooze
time mode. It goes off again at the end of the snooze time (snooze can
be repeated).
In snooze time mode, press any key except the Snooze/Sleep button "
" , or hold the Snooze/Sleep button "
seconds to exit the snooze time mode.
10. Temperature and humidity
Press and release the "UP/TEMP"button to see the high and low temper-
ature, humidity, and Feels Like values such as temperature, dew point
temperature, heat index, and windchill index.
Note: Feels Like values such as temperature, dew point temperature,
heat index, and windchill index refer to the value recorded by the wire-
less outdoor sensor.
In the temperature and humidity history display mode, press and hold
the "SETTINGS" button for 3 seconds to clear the entire indoor and out-
door temperature and humidity history.
English
" button or touch and hold the " " but-
" for more than 3
39