Masterbuilt GRAVITY Serie Manuel D'utilisation page 13

Parts List
NO. QTY. DESCRIPTION
1 2 Smoking/Warming Racks
2 2 Smoke + Sear Grates
3 1 Temperature Gauge
4 1 Lid Assembly
5 1 Handle Tube
6 1 Heat Manifold Support
7 1 Temperature Probe Bracket
8 1 Temperature Probe
9 1 Heat Manifold (Griddle)
10 1 Body Assembly
11 3 Lid/Door Switch
12 1 Side Shelf Assembly
13 1 Controller Assembly
14 1 Bottom Tray Assembly
15 1 Left Rear Leg Assembly
16 1 Left Front Leg Assembly
17 1 Grease Tray
18 1 Side RH Leg Brace
19 1 Right Rear Leg
20 1 Right Front Leg
21 1 Wheel Axle with Lock Nut / 3 Washers / 2 Bushings
22 2 8" Wheel
23 1 Bottom Shelf Assembly
24 2 3" Caster
25 1 Back Leg Brace
26 1 Front Leg Cross Brace
27 1 Side LH Leg Brace
28 1 Front Shelf Assembly
29 3 Tool Hanger
30 1 Hopper Lid Handle Washer
31 1 Hopper Lid Handle
32 1 Hopper Heat Shield - Top
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
•
• Assemble on a clean fl at surface.
• Recommend assembling on cardboard to avoid oil residue on fl oors or scratches.
• Gloves recommended for assembly. Hopper gasket is fi berglass and will irritate skin.
• Tools needed: Phillips head screwdriver, adjustable wrench, 19mm socket wrench.
• Approximate assembly time: 1 hour, 45 minutes.
• Recommend two people assemble to increase ease and reduce assembly time.
• Actual product may differ from picture shown.
• It is possible that some assembly steps have been completed in the factory.
• Remove all printed labels from the grill and hopper before use.
DO NOT RETURN TO RETAILER for assembly assistance, missing or damaged parts. Please
contact MASTERBUILT Customer Service at 1-800-489-1581 or www.masterbuilt.com/pages/
STOP
support. Please have the model number and serial number available. These numbers are located
on the silver rating label on the grill.
NO. QTY. DESCRIPTION
33 1 Hopper Lid Latch
34 1 Hopper Assembly - Top
35 1 Hopper Gasket
36 2 Front/Rear Fire Brick
37 1 Left Fire Brick
38 1 Right Fire Brick
39 1 Hopper Assembly - Middle
40 1 Grill Heat Intake Fiber Spacer
41 1 Heat Intake Slide (Large)
42 1 Air Intake Slide (Small)
43 1 Hopper Door Latch
44 1 Charcoal Grate Assembly
45 1 Fan Brace
46 1 Hopper Heat Shield - Bottom Rear
47 1 Hopper Door Assembly
48 1 Fan
49 1 Fan Guard
50 1 Hopper Assembly - Bottom
51 1 Hopper Heat Shield - Bottom Front
52 1 Ash Tray Assembly
53 1 Manifold Ash Grate
54 1 Hopper Lid Assembly
55 1 Hopper Shrouding
56 2 Lid Handle Base
57 1 Antenna
58 1 Meat Probe
59 2 Lid Handle Washer
60 1 Griddle
61 1 Heat Manifold (Grill)
62 1 Heat Manifold Base
63 1 Cord Managment Bracket
1 Power Coed / Plug - Not Shown