STOK GridIron STG1050 Manuel D'utilisation page 10

STEP 4: ATTACHING FIREBOX HANDLE
See Figures 11 - 12.
 Raise and open the stand.
 Lift the hood latch then raise firebox hood.
 Insert studs in firebox handle (A) through holes in firebox
hood.
 Install wing nuts (AA) and tighten securely.
STEP 5: INSTALLING THE GREASE CUP
See Figure 13.
 Slide the grease cup (B) into the cup holders on the bot-
tom of the grill.
NOTE: Clean the grease cup after each use. Do not remove
the grease cup until after the grill has cooled completely.
Do not transport the grill with a dirty grease cup.
FIREBOX
Fig. 11
ASSEMBLY
HOOD
LATCH
FIREBOX
HOOD
10 — English
WING
NUT
Fig. 12
GREASE
CUP
Fig. 13
FIREBOX
HANDLE
FIREBOX
STUD
HOOD