Description; Technical Data; Safety Precautions - Hilti HIT-P 8000 D Mode D'emploi

2. Description

2.1 Correct use
The tool is designed, first and foremost, for professional
use. The tool is used to dispense and inject adhesive mor-
tar supplied by the Hilti Corporation for anchor fastening
applications and for retrofitting steel reinforcing bars. Its
en
built-in injection volume regulator makes the tool partic-
ularly suitable for repetitive applications. The dispenser
operating pressure is provided by compressed air.
Changes or modifications to the tool are not permissible.
●
3. Accessories, consumables
Standard equipment
Optional accessories
Consumables

4. Technical data

Tool without foil pack
Weight (tool only, without adhesive mortar and foil
pack holder)
Dimensions (LxWxH)
Compressed air connection
Min. operating pressure
Max. input pressure
Optimum air flow rate
Operating temperature range
Transport and storage temperature range
Right of technical changes reserved

5. Safety precautions

5.1 Basic information concerning safety
In addition to the information relevant to safety given in
each of the sections of these operating instructions, the
following points must be strictly observed at all times.
5.2 Take the necessary precautions to make the
workplace safe
Ensure that the workplace is well lit.
●
8
Printed: 11.03.2014 | Doc-Nr: PUB / 5103003 / 000 / 03
To avoid the risk of injury, use only original Hilti acces-
●
sories and additional equipment.
The information concerning operation, care and main-
●
tenance printed in the operating instructions must be
observed.
Do not point the tool toward yourself or other per-
●
sons.
Do not press the tool against your hand or any other
●
part of the body.
The tool and its accessories may present hazards when
●
used incorrectly by untrained personnel or when used
not as directed.
Dispenser
Foil pack holder
Shoulder belt
Set of couplings for connection to various
compressed air systems
Adhesive mortar (package includes the
necessary accessories)
approx. 6.2 kg
580x 170x 330 mm
1/4 "
6 bar
10 bar
250 l/min
5-40 ºC
0-40 ºC
Ensure that the workplace is well ventilated.
●
Keep the working area tidy. Objects which could cause
●
injury should be removed from the working area.
When working, keep other persons, particularly chil-
●
dren, outside the range of the tool.
Avoid unfavorable body positions when working. Work
●
from a secure stance and always stay in balance.
To avoid the risk of tripping while working, always lead
●
the compressed air hose away from the tool to the rear.
When working on a scaffold, the tool must be secured
●
to prevent it falling.