HIT-P 8000 D dispenser
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions
are with the tool when it is given to other
persons.
Component parts
Grip
Trigger (piston advance)
Foil pack holder
Foil pack
Cylinder
Compressed air coupling
Mixing nozzle
Injection volume regulator
Piston return button
Contents
1. General information
3. Tools and accessories
Printed: 11.03.2014 | Doc-Nr: PUB / 5103003 / 000 / 03
1. General information
1.1 Signal words and their meaning
-CAUTION-
Used to draw attention to a potentially dangerous situa-
tion which could lead to minor personal injury or dam-
age to the equipment or other property.
-NOTE-
Used to draw attention to an instruction or other useful
information.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear
Wear
protective
eye
gloves
protection
Symbols
Read the
operating
instructions
before use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
Page
always refers to the HIT-P 8000 D dispenser.
7
8
Location of identification data on the tool
8
The type designation can be found on the rating plate and
8
the serial number on the side of the motor housing. Make
8
a note of this data in your operating instructions and
always refer to it when making an enquiry to your Hilti
9
representative or service department.
9
10
10
Type:
11
11
Serial no.:
HIT-P 8000 D
en
7