Pur Line MISTY 10 Manuel D'utilisation page 13

terminal of the column. Fit the bracket of the motor unit into the column and make sure the motor unit
is in the same direction with the mist volume control before tightening the screw.
5. Install the mist nozzle in the front grill. Make sure the fastener of the nozzle is aligned with the fastener
of the front grill before pressing and fixing the 2 fasteners.
1
Mist guide
tube
OPERATION
Mist button
Control
2 3
Remove the screw from the rear grill. Then lift the rear grill to align the fixing
hole with the rear grill. Fix them with the previously removed screw and loosen
the fan blade fixing screw. Then fit the fan blade on the motor shaft and tighten
the blade fixing screw. Put on the grill fastener. Finally, install the front grill (with
mist nozzle fixed in it) and tighten the screw in the grill fastener.
EN
4 5
Connect the longer end of the tube to the
mist outlet in the base and the other end
to the mist nozzle.
Mist nozzle
11
Speed button
Swing
Angle