Comfee CP05S3WBA1RCM Guide De L'utilisateur page 18

18
model no. CP05S3WBA1RCM | contact us: 1866.646.4332
Operation Instructions
COOL operation
• · Press the "MODE" button until the "COOL" indicator
light comes on.
· Press the ADJUST buttons "+" or "-" to select your
•
desired room temperature. The temperature can be
set within a range of 17°C~30°C/62°F~88°F(or 86°F).
• · Press the "FAN SPEED" button to choose the
fanspeed.
DRY operation
· Press the "MODE" button until the "DRY" indicator
•
light comes on.
• · The fan speed or the temperature cannot be
adjusted. The fan motor operates at LOW speed.
NOTE:Keep windows and doors closed for the best
FAN operation
• · Press the "MODE" button until the"FAN " indicator
light comes on.
• · Press the "FAN SPEED" button
controller to choose the fan speed. The temperature
can not be adjusted.
· Do not put the duct to window.
•
Other features
SLEEP/ECO operation
This feature can be activated from the remote control
ONLY. To activate SLEEP feature, the set temperature
will increase(cooling) or decrease(heating) by 1°C/2°F
(or 1°F) in 30 minutes. The set temperature will then
increase(cooling) or decrease(heating) by another 1°C
/2°F (or 1°F) after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it
on
the remote
returns to the originally selected temperature. This
ends the Sleep mode and the unit will continue to
operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY
mode.
FOLLOW ME/TEMP SENSING feature
NOTE:This feature can be activated from the remote
control ONLY. The remote control serves as a remote
Constant Fan button
In cooling or Dry mode, press the button for
function. When the function is turned on, the
constant fan light will illuminate, identifying
the fan continuous run for cooling. When the
will go out, identifying the fan cycle run with
compressor stop.