Publicité
Les langues disponibles
Les langues disponibles
EN
DUST SENSOR
This product is equipped with dust sensor which can detect pollution particles in the air, as indoor dust (dust,
mite corpses and excrement, pollen, fungus bubbles...), smoke or cigarettes or joss-sticks, pets hairs...
When the sensor detects dust in automatic mode, it can automatically control the air flow and start to work.
CLEANING AND MAINTENANCE
Please make sure the power is shut down and the plug is pulled out before cleaning or
maintenance.
The lifetime of the filter differs based on indoor environment, usage times and usage location. The standard
cleaning time is once every 6 months and replacing every year.
To improve the efficiency, please purchase the filter suggested by PURLINE.
Please make sure the power is cut off before replacing new filter.
Unplug the appliance before cleaning.
Do not use harsh chemicals for cleaning.
No water on the control panel.
Do not flush by water or soak any filter to be used on this product.
Antimicrobial pre-filter should be cleaned by soft brush every half month to clear away the large pollutant, like hairs.
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse directly with
water.
SENSOR CLEANING
Clean once about every 3 months.
Open the protective cover.
Use a slightly wet cotton swab to clean
the dust sensor, and a dry cotton swab
to keep it dry.
Close the protective cover.
FILTRO
Absorb the larger dust sticking around the filter.
Take care and do not damage the surface of the filter.
Can NOT be washed in water (otherwise damage may be caused to its performance).
Note: When removing the filter, if you touch the black surface (activated carbon) around the catalytic deodorizer
device, your hands may get dirty.
11
Publicité
