Pur Line FRESH AIR 150 Manuel D'utilisation page 11

PARTS
OPERATION
Control panel
LED display
OPERATION
TAKE OUT THE FILTER
Before first use, take out/install filter.
1. Remove the cover plate of filter. Put the device upside
down in a clean smooth desk, on a cloth to avoid to scratch
the surface.
2. Rotate counterclockwise the cover to release the filter and
unlock it.
3 - 4. Take out the filter and remove the plastic bag from the
filter.
5. Install the filter inside the device.
6. Lock the filter, rotate clockwise to lock the filter and finish
the installation.
In order to allow the best performance of the purifier, keep
it to a proper distance away from the wall and other objects
when it is in use:
- At least 120 cm from ceiling
- At least 30cm form wall or other objects
EN
Sensor
Air inlet
1
3
5
9
2
4
6