EN
CLEANING AND MAINTENANCE
The lifetime of the filter differs based on indoor environment, usage times and usage location.
Suggested time of changing filter: about once a year.
To improve the efficiency, please purchase the filter suggested by PURLINE (Ref.: FA50F).
Please make sure the power is cut off before replacing new filter.
Unplug the appliance before cleaning.
Do not use harsh chemicals for cleaning.
No water on the control panel.
Do not flush by water or soak any filter to be used on this product.
Use soft brush or dry cotton cloth to clean the filter surface only.
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse directly with
water.
SENSOR CLEANING
Keep surface of the sensor clean, or sensitivity is affected
and even fails to work.
Recommended cleaning cycle is less than 1 month for
regular use.
Clean the sensor with a cotton swab.
Do not use detergent or any liquid in the cleaning
process.
FILTER
1 Turn upside down the device.
2 Rotate the base cover to take out the filter by the guide
Cover
arrow.
3 Replace the filter.
Filter
4 Take care to rotate the base cover in reverse direction
described on step 2.
UV lamp
11