Publicité
Les langues disponibles
Les langues disponibles
V 4.1
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Keep the tool handles clean, dry and free from oil/grease at all times.
5.
Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
PREVENTIVE MAINTENANCE
Turn off the engine and place the gear selection lever into neutral. Wait until the
engine is cool. Remove all debris and other materials that may have
accumulated on the tracks, engine or chassis.
ADJUSTING THE CLUTCH
A worn clutch may require moving the clutch lever farther before the
clutch engages.
1.
Set the clutch lever to its original position.
2.
Remove slack from the clutch lever cable with the adjustment device and
counter-nut.
ADJUSTING THE STEERING
The steering system may become less responsive with wear and tear to the unit.
Adjust one steering lever, before adjusting the other one.
1.
Loosen the locknut and unscrew the adjuster just enough to allow the
cable to move when force is applied. Do not loosen too much as traction
can be lost.
2.
Eliminate slack in the cable and tighten the adjuster.
3.
Tighten the locknut and test the tension in the steering lever.
Visit www.princessauto.com for more information
660 lb Power Wheelbarrow
8724981
9
Publicité
