Set Up The Gateway - TENA SmartCare Change Indicator Instructions D'utilisation

NOTE
The Change Indicator must be within 10 m/33 ft from a gateway to be
monitored by the system.
Placement
3
Blinking light Steady light
You can also place the
= connecting = connected
gateway on a flat surface

Set up the gateway

10 m/ 33 ft
Light
See page 23
Gateway lights
& buttons
4
No light
= OK
1
Screws or
adhesive strip
2
Removal of the item: Grab
removal tab and slowly slide
the tab straight down against
the wall stretching the tape
at least 6 inches (15cm) until
item releases from the wall
Click!
5
en
9