Attachment Instructions For Supported Tena Products; Tena Slip - TENA SmartCare Change Indicator Instructions D'utilisation

TENA Slip

The TENA SmartCare Change Indicator™ should always be attached when the
incontinence product is folded and before it has been applied to the user.
NOTE
Ensure the Change Indicator is straight. Smooth any
sensor strip wrinkles, then press firmly to ensure the
Change Indicator has full contact with the TENA
absorbent product.
1
Find the front
TENA Slip /
TENA Stretch Brief /
TENA Brief
4
Place tightly
TENA Pants/
TENA Underwear
Attachment instructions
for supported TENA products
Keep folded
Every time you change an
incontinence product, press both
buttons simultaneously for two
seconds to reset the transmitter
to register the change in the app.
2
TENA Flex
5
3
Align with the top
of the thicker
absorbent area
6
Apply the absorbent product
with the Change Indicator to
your loved one.
Apply TENA product
on the resident
en
17