THOMSON SMART 762 Mode D'emploi page 37

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Colour video interCom 18Cm
• Wave the configuration badge in front of the
name plate again. The intercom panel will beep
4 times in a row.
• Wave the access badge you want to deactivate
in front of the name plate. The intercom
panel will beep once. The badge is deleted
from memory and will no longer activate
the automated gate or electric strike plate
connected to the intercom panel.
• If necessary, you can wave several access
badges in a row to deactivate them.
5.4 - DEACTIVATINg ALL RECORDED BADgES
• To deactivate all access badges (in case of
loss or theft, for example), while the video
doorkeeper's screen is off, hold the intercom
panel's call button until it emits one beep
C - iNSTALLATiON
(around 3 seconds).
• Wave one of the configuration badges in
front of the intercom panel's name plate. The
intercom panel will beep 3 times in a row.
• Hold the call button again until it emits one long
beep. All registered access badges are deleted
from the intercom panel's memory.
5.5 - SELECTINg ACCESS BADgE SWIPINg
ACTION
• The selector switch on the back of the intercom
panel allows you to choose whether swiping an
access badge activates the electric strike plate
or the electronic gate.
1
2
EN
EN
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

512262

Table des Matières