Entering Bar Code Data - Brother P-touch PT-2100 Guide De L'utilisateur

EDITING A LABEL
Attribute
Protocol
Width
Under#
(characters printed
below bar code)
C.Digit
(check digit)

Entering Bar Code Data

Press the
1
The Bar Code Input screen is displayed.
Up to five bar codes can be entered on a label.
Type in the bar code data.
2
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
EAN128 protocols. When not using special characters,
go to step 5.
Press the
3
A list of characters available for the current protocol is
displayed.
Select a character using the
4
the or
data.
46
Creating a Bar Code Label
Bar Code Settings
CODE39, CODE128, EAN8, EAN13, EAN128,
UPC-A, UPC-E, I-2/5 (ITF), CODABAR
(only available for the CODE39, I-2/5
key.
key.
or
key to insert the character in the bar code
Value
Large
Small
On
Off
Off
On
and CODABAR protocols)
keys, then press