Linde Domistar Notice D'utilisation page 14

14 EN. Domistar, Hospistar, Neostar, PF4 - High Pressure regulators. Instruction for Use.
8.2 Repairs
→ Repairs
Repairs activities cover the replacement of the following damaged or missing
components:
• inlet stem
• flow-metering device
• gauge
The repairs shall be carried out by a producer authorised person only.
Any product sent back to a producer authorised person for maintenance shall
be properly packaged. The purpose of the maintenance has to be clearly
specified (repair, overall maintenance). For product to be repaired a short
description of fault and any reference to a claim number might be helpful.
Some repair activities concerning to the replacement of the damaged or
missing components can be carried out by the owner of the product. The
following parts can be replaced only:
• caps
• flow knob and stickers
Contact our customer service for appropriate product number.
All labels on the equipment must be kept in good, legible condition by the
owner and the user during the entire product life time.
All seals and o-rings must be kept in dry, dark and clean environment by the
owner and the user during the entire product life time.
Use only original components!
• piston
• pressure relief valve
• quick coupler
• hose nipple (including o-ring),
• Inlet stem o-ring or Bodock seal (to
replace every 6 months)