Jimmy H8 Pro Mode D'emploi page 6

Assemble metal tube and handheld
vacuum
First, assemble floorhead and metal tube according
to the method of assembling electric floor head and
metal tube.(Fig 4)
Assemble the floorhead, metal tube and
handheld vacuum cleaner
As shown by the arrow, align the conductive needle
of the metal tube with the coupler of the suction
nozzle, push up until a"click" sound is heard.(Fig5)
Assemble the charging stand
Assembly sequence: Insert stand into stand base
as ① , insert charger bracket into stand as ② . After
assembly the stand is like ③ . Please the vacuum
cleaner to bracket. (Fig 6)
Assembly of accessories
For the convenience of use, this product is specially
equipped with some accessories for the handheld
part of the vacuum cleaner. When you use the
handheld vacuum cleaner alone, you can directly
connect the accessories according to your needs or
connect the accessories through the stretch hose.
Assemble accessories to handheld
vacuum cleaner
Align electric mattress head connector with handheld
vacuum, insert to the end as the picture.(Fig 7)
Attn:The handheld vacuum can be connected with
2-in-1 upholstery, 2-in-1 crevice tool and soft brush
as electric mattress head.
Assemble accessories to handheld
vacuum cleaner
Align the vacuum cleaner with stretch hose, insert
until it is fully tightened. Connect stretch hose with
2-in-1 upholstery tool: insert the 2-in-1 upholstery tool
into the stretch hose until it is fully tightened.(Fig 8)
4
4
5
6
①
②
7
8
③