Jimmy H8 Pro Mode D'emploi page 10

3.Rotate HEPA holder to lift HEPA from
v a c u u m c l e a n e r. C y c l o n e c a n a l s o
be removed from vacuum cleaner for
cleaning in the same way.(Fig 21)
4. Rotate HEPA holder to take off HEPA
for cleaning.HEPA needs completely dry
before reuse.
5.After clean and dry the HEPA (Replace
HEPA if necessary).(Fig 22)
Clean brushroll
Move the brushroll release button along
the arrow direction to remove side cover.
(Fig 23)
Remove one end of the brushroll and
take it out from nozzle for cleaning.
After cleaning or replacing brushroll,
assemble it back in opposite sequence of
disassembly.
Clean floorhead air path
1. Push the two buttons to remove
floorhead air path cover.(Fig 25).
2. Hold floorhead air path with finger and
pull it out to clean.
3. After cleaning, assemble in opposite
sequence of disassembly.
When the vacuum is long idled, need
to remove the battery. Press the battery
release button, remove the battery pack in
the arrow direction and place the battery
in a plastic bag, then store it in a cool and
dry place, do not put in direct sunlight or
humid environment. (Fig 26)
8
20
21
22
23
24
25
26