Cautions And Warnings - Health O Meter Professional PROPLUS 4025 Mode D'emploi

CAUTIONS AND WARNINGS

To prevent injury and damage to your scale, please follow these instructions very carefully.
 To ensure proper operation of your ProPlus® 4025/4026/4261 this operation manual should be
reviewed carefully before using the scale.
 Please keep this manual available for future reference, and also for use in the orientation or
training of new personnel who will use this scale.
 If the scale becomes damaged, it should not be operated until properly serviced. All repairs
should only be performed by authorized Health o meter® Professional service personnel.
 This scale is designed for static weighing of patients only. Do not leave patients unattended
while on the scale.
 For accurate weighing, the scale must be placed on a flat and stable surface with the
locking screw locked properly and the weighing mechanism not touching the floor.
 For accurate weighing, verify proper operation according to the procedure described in this
manual before each use.
 Do not use in the presence of flammable materials.
 Operating at other voltages and frequencies than specified could damage the equipment.
 If the "LOW BAT" indicator activates, replace the batteries or connect the scale to an AC power
source as soon as possible, for accurate weighing.
 Failure to comply with the following will void the scale warranty:
o Do not gas or steam sterilize the scale, nor place it through an autoclave.
o Do not place liquids on top of the scale display console.
o Do not exceed recommended weight limit of 1,000 lb / 454 kg for this scale.
o This scale contains delicate sensors. Do not drop the scale, bang it into doors,
elevators, etc., as damage may result.
3