hager RTN500X Manuel page 13

RTN500X
Expert configuration
Expert configuration for custom installations
The expert area is provided for custom integration of the IP camera module into existing networks. In addition to the net-
work settings, you will also find additional options here for special requirements (see the IP system manual).
www.hager.com Subject to technical changes
After calling up the Web inter-
face, select the "Expert configu-
ration" area and log in with the
factory username:
Username:
Password:
on the IP door speaker module.
NOTE:
The video stream can be re-
trieved using the links displayed
on page 9. Please be sure that
the device/client used supports
video playback (MJPEG) or
signal image display (JPEG). A
viewer account is predefined at
the factory:
Username:
Password:
Configure the camera module
for the existing network using
the "IP address", "Net mask",
!
"Gateway", and "DNS" fields.
This will make the camera
module available to IP tele-
phones (with suitable video sup-
port), Windows videophones
VWC-300 and
CBS-300.
IMPORTANT:
In general, no further settings
will be necessary. For more de-
tailed information, please see
the current IP system manual.
admin
1234
camuser
view
Multiviewer
13