AJAX Hub 2 Plus Manuel D'utilisation page 45

Arming without Passcode
Unathorised Access Auto-lock
Auto-lock Time (min)
Brightness
Buttons Volume
Alert with a siren if panic button is pressed
Jeweller Signal Strength Test
Signal Attenuation Test
Temporary Deactivation
Off — the Function button is disabled and
does not execute any commands when
pressed
Alarm — by pressing the Function button,
the system sends an alarm to the
monitoring station of the security company
and to all users
Mute Interconnected Fire Alarm — when
pressed, mutes the re alarm of
FireProtect/FireProtect Plus detectors. The
feature works only if Interconnected
FireProtect Alarms is enabled
Learn more
If active, the system can be armed by pressing
Arm button without passcode
If active, the keyboard is locked for the pre-set
time after entering incorrect passcode three
times in a row (during 30 min). During this time,
the system cannot be disarmed via KeyPad
Lock period after wrong passcode attempts
Brightness of the keyboard backlight
Volume of the beeper
The setting appears if the Alarm mode is
selected for Function button.
If active, the Function button pressing triggers
the sirens installed at the object
Switches the device to the signal strength test
mode
Switches the KeyPad to the signal fade test
mode (available in devices with rmware
version 3.50 and later)
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
Entirely — the device will not execute
system commands or participate in
automation scenarios, and the system will
ignore device alarms and other noti cations