AJAX Hub 2 Plus Manuel D'utilisation page 41

Connecting
Before connecting the device:
1. Switch on the hub and check its Internet connection (the logo glows white
or green).
2. Install the Ajax app
at least one room.
3. Make sure that the hub is not armed, and it does not update by checking its
status in the Ajax app.
Only users with administrator rights can add a device to the app
How to connect KeyPad to the hub:
1. Select the Add Device option in the Ajax app.
2. Name the device, scan/write manually the QR Code (located on the body
and packaging), and select the location room.
3. Select Add — the countdown will begin.
4. Switch on KeyPad by holding power button for 3 seconds — it will blink once
with the keyboard backlight.
For detection and pairing to occur, KeyPad should be located within the
coverage of the wireless network of the hub (at the same protected object).
malfunction indicator blinks smoothly. The
keyboard is locked while the indicator blinks.
When activating KeyPad with low batteries, it
will beep with a long sound signal, the
malfunction indicator smoothly lights up and
then switches off
. Create the account, add the hub to the app, and create