AJAX Hub 2 Plus Manuel D'utilisation page 40

KeyPad allows arming the system without passcode: by pressing the button
(Arm). This feature is disabled by default.
When the function button (*) is pressed without entering the passcode, the hub
executes the command assigned to this button in the app.
KeyPad can notify a security company of the system being disarmed by force.
The Duress Code — unlike the panic button — does not activate sirens. KeyPad
and the app notify of successful disarming the system, but the security
company receives an alarm.
Indication
When touching KeyPad, it wakes up highlighting the keyboard and indicating the
security mode: Armed, Disarmed, or Night Mode. The security mode is always
actual, regardless of the control device that was used to change it (the key fob
or app).
Event
Malfunction indicator X
KeyPad button pressed
The system is armed
The system is disarmed
Incorrect passcode
A malfunction is detected when arming
(e.g., the detector is lost)
The hub does not respond to the command —
no connection
KeyPad is locked after 3 unsuccessful attempts
to enter the passcode
Low battery
blinks
Indication
Indicator noti es about lack of communication
with hub or keypad lid opening. You can check
the reason for malfunction in the
Security System app
A short beep, the system's current arming state
LED blinks once
Short sound signal, Armed mode / Night mode
LED indicator lights up
Two short sound signals, LED disarmed LED
indicator lights up
Long sound signal, the keyboard backlight
blinks 3 times
A long beep, the system's current arming state
LED blinks 3 times
Long sound signal, the malfunction indicator
lights up
Long sound signal, security mode indicators
blink simultaneously
After arming/disarming the system, the
Ajax