Whirlpool CAE2763BQ Guide D'utilisation Et D'entretien page 8

7.
Select WASH TEMP
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the appropriate setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than your hot
water heater setting.
Warm
Some cold water will be added, so this
will be cooler than what your previous
washer provided.
Cool
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Cold
This is the temperature from your faucet.
If your tap cold water is less than 50°F
(10°C), warm water may be added to
assist in soil removal and help dissolve
detergent.
8
8.
Press the START button to start the wash cycle. When the
cycle has fi nished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments or fabric softener
If you need to open a locked lid to add 1 or 2 missed
garments or add fabric softener:
Press START for 3 seconds; the Lid Locked Light will blink
and the lid will unlock once the washer movement has
stopped. This may take several minutes if the load was
Suggested Fabrics
spinning at high speed. Then close lid and press START
again to restart the cycle.
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light
soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Press START to begin wash cycle