Storing Your Own Sound Adjustments - JVC KW-XC770 Manuel D'instructions

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 19) to your preference and
store your own adjustments in memory.
1, 4
1
SCM
Within
5 seconds
2
SEL
Within
5 seconds
3
SEL
Within
5 seconds
4
SCM
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 19.
2
3
Call up the sound mode you want to adjust.
See page 19 for details.
Select "BAS (bass)," "TRE (treble)" or "LOUD
(loudness)."
Adjust the selected item.
See page 20 for details.
Press and hold SCM until "MEMO" flashes on
the display.
Your setting is stored in memory.
21