Kapro Prolaser 875 Green Manuel D'utilisation page 12

Working in Manual mode:
In Manual mode the 875G the self-leveling mechanism is disabled
and the laser beams can be set at any slope required.
1. Long press on the push button M (#3) will activate the Manual
mode. The laser will project blinking forward cross beams, and
the red LED (#5) will light up.
2. Choose the beams that you want to work with by pressing the
push buttons V or H.
3. To mark the slope, tilt the laser to the desirable slope.
4. To turn the manual mode OFF, press again the M (#3).
5. While in Manual mode, turning the pendulum safety lock (#12)
from OFF to ON will turn off the Manual mode, and the red
LED (#5), near the push button M (#3). The automatic
self – leveling will be activated if the laser level is within
the self – level range.
12