Hoover WH21000 Guide D'utilisation page 8

WARNING:
To reduce the risk of
personal injury - Unplug the steam cleaner
when assembling the accessories
IMPORTANT:
Please refer to floor
manufacturer's care recommendations
before use and test the steam cleaner on a
discrete area of flooring to begin with
NOTE:
The steam cleaner is equipped
with a thermostat and a thermal cut out If
for any reason the steam cleaner overheats
it will switch off If this happens turn off and
unplug the steam cleaner, allow to cool for a
least 2 to 4 hours and re-start
8
Operation
1. 2.
Place the microfiber pad .Plug into an outlet and
on the floor white side Push On/Off switch to
facing up. Place floor turn ON (I=ON). The blue
head onto pad making light will illuminate
sure the entire pad covers to show power on. The
the floor head green light will illuminate
to show the steam mop
is ready to use.
3. 4.
Adjust the steam dial to Utilize the Supplemental
desired setting. Water Tank by turning
the dial to "LARGE AREA"
when cleaning large
spaces and turn the dial
to "SMALL AREA" for quick
cleaning.