Furniture Placement Guide & Cup Holder Operating And Cleaning Instructions - LAZBOY PowerReclineXR+ Instructions

Fauteuil électrique avec appui-tête et support lombaire électrique
Masquer les pouces Voir aussi pour PowerReclineXR+:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Furniture Placement Guide
& Cup Holder Operating and Cleaning Instructions
WARNING
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
To place your reclining unit the proper distance from the wall, fully recline the unit and leave
a minimum of 2" of space between the top of the back and the wall.
Place tables and area rugs at a distance to allow the legrest to fully extend without rubbing
or interference.
2" Min.
Operating Instructions for the LED Lighted Cup Holder:
Lightly touch the indented circle on the inside of the cup holder with your finger to turn the cup
holder light on and off. No pressure is necessary operate the cup holder light.
The finish on the cup holder can be damaged during use or cleaning. It is recommended that a
coaster be used to reduce the chance for damage, and that the cleaning instructions be followed.
Use water and mild soap, such as dish soap, to clean the cup holders. Dry immediately and
thoroughly with a soft clean cloth to maintain the finish.
The use of harsh, abrasive cleaners is not recommended and must be avoided.
12
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières